| Grandpas
Rocker Code # 22
Let me help
you build an heirloom rocker. Anyone can do it
with my Kit parts.
Kit parts: I will rough cut all the part for a custom rocker
in the Maloof style. The full instruction manual
with patterns. and colored pictures, to finish the rocker will be included,
as well as lots of pictures on a CD.
The cost is $850 + packaging & freight. You
could pay this much just for the wood.
Until stock lasts I have some Claro and Bastogne walnut, from the same stock Sam Maloof was shipped recently, which I will be selling for $2,500 for the cut kit parts.
Code # 22 for kit info.
The pictured rocker is made with Bastogne
walnut. The kit rocker can be made in this style
or others. If accents, such as, Ivory,
Ebony, Maple, Myrtle etc. are wanted they can be
provided with applicable instructions for a
small additional charge.
"You Build" (Seminar Rocker) Code # 21
If you prefer to make your own rocker
(You-Build) I will give the personal
(one-on-one) attention necessary while we
construct your rocker (about one week). I supply
the wood of your choice (so long as it is not
toxic), all information, tools, patterns, jigs,
shop space, adhesives and snacks. This includes
the accent materials such as Ivory, Ebony,
Bastogne, African Blackwood, Burled Mesquite
etc. When you take your rocker home it will
still need to be finish sanded and detailed
using my supplied finish and instructions. For
Mesquite wood the cost is $4,500 for the seminar
help, wood etc. If you choose an exotic species
of wood the cost will have to be adjusted .This
is the best way to receive personal
instructions, manual, jigs, etc and obtain a
rocker. You can keep the rocker or sell this
rocker at a profit to pay for the class. You end
up with the ability to make custom rockers for
free. For the "You-Build seminar rocker" please
contact me about any week of the year.
Code # 21 for "You-Build seminar rocker" info. Email me or give me a call if you have questions. bill@kappelusa.com OR call 435-283-3193.
Semi
Rocker Code # 23: if you
would like me to semi complete a rocker the cost
is $3,300 for White Oak plus packaging &
freight. Or add the cost of some exotic wood
species you choose. You receive an assembled
rocker plus the Backslats and Headrest parts
plus the instruction manual. l will rough cut
and assembled the rocker except for the Headrest
and Backslats. You finish the rocker by shaping
in the arm, leg and Headrest joints, then finish
sanding. The Headrest and slats will have to be
mounted after you finish sanding them. My
instructions will give complete details about
how to mount the Backslats and Headrest. The
Backslat holes are drilled in the seat and
Headrest. The Backslats will be sized with the
tenon for both ends cut. The Headrest will be
pre-fitted to the legs and Backslats, but will
need to be sanded and glued in place. This is a
good way to get a new rocker and still have the
pride of your own work. call (435-283-3193) or
email bill@kappelusa.com
Code # 23 for semi rocker info. |